1.1 Txheej txheem cej luam
RCR-2600 LED daim npav nyeem ntawv yog tus nyeem ntawv siab tshaj plaws uas tau tsim los. Nws los nrog kev nyeem tus neeg ua si ID los ntawm ob txoj kab sib nqus sib nqus los yog los ntawm RFID nti embedded.
1.2 Interface
1.2.1 RS232 interface
Pin 1 ---- GND
Pin 2 ---- TXD
Pin 3 ---- RXD
Pin 4 ---- VCC 5V
1.2.2 USB interface
Pin 1 ---- GND
Pin 2 ---- DATA-
Pin 3 ---- DATA plus
Pin 4 ---- VCC 5V
1.3 Specification
Daim npav sib nqus | Ua raws li ISO7810. Nws tuaj yeem nyeem 60 feem pua ntawm cov kab hlau nplaum |
RF Card | Ua raws li ISO{0}}/-4 tus qauv nrog zaus ntawm 13.56MHz; Contactless IC card (HOM A, HOM B, CPU card); Mifare S50 / S70 / UL / Plus daim npav nyeem / sau. |
Interface | RS232 / USB / Buletooth 4 0 |
LED | Tswj tau LEDs |
Kub | Kev khiav hauj lwm: 0 degree ~ ntxiv rau 60 degree Cia: -20 degree ~ ntxiv rau 60 degree |
Voltage input | DC 5.0± 5% V / USB fais fab mov |
Kev siv tam sim no | Kev ua haujlwm tam sim no: <50 mA Peak tam sim no: <200 mA |
Tus nyeem ntawv no yog customized rau twv txiaj yuam pov & gaming, uastag nrho cov mag-stripe cards. Nyob rau tib lub sijhawm nws tuaj yeem nyeem thiab sau 13.56 mhz RFID phaib.
FAQ:
1. Koj muab qhov interface twg?
RE: Rs232 ,USB thiab bluetooth4.0 raws li kev xaiv
2. Cov coj tuaj yeem tswj tau?
RE: Yog, LED tuaj yeem tswj tau los ntawm software.
3.Koj tus MOQ yog dab tsi?
RE: MOQ yog 100 pcs, tab sis cov qauv txiav txim tau txais ua ntej txiav txim ntau.
3. Koj lub sijhawm ua haujlwm yog dab tsi?
Lub sij hawm ua tus coj yuav raug coj raws li kev txiav txim kom muaj nuj nqis.
Feem ntau, cov qauv xaj yog 2-3 hnub tom qab them nyiaj tiav .
qhov kev txiav txim ntau yog 2-3 lub lis piam tom qab them nyiaj tiav .